POWER\\ QUICK START GUIDE
Model numbers: 5S-PS6-US1, 5S-PS8-US1, 7S-PS6-US1 and 7S-PS8-US1 A CAUTION To reduce the risk of electrical shock, only use the power strip . . indoors and in cool dry locations. DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords or adapters or any type of extension cord into the power strip. DO NOT install power strip near any heat-emitting appliances such as radiators or heat registers. DO NOT install where excessive moisture is present.
INSTALLATION Plug in your power strip to your AC Power Line: Be sure the power strip's power cord is plugged into a standard, 3-wire grounded 120V AC, 60Hz outlet. Turn your power strip ON: Press the power strip's power switch until it illuminates blue, indicating the unit is On and connected to AC input power. Review the LED status indicator lights: Check the LEDs prior to connecting any of your equipment.
When plugged in, if the ground indicator LED does not light, move the power strip to a different grounded 3-prong AC outlet. If this symptom continues, your outlets may not be properly grounded and needs to be repaired by a professional electrician. If the protected LED does not light, the power strip's AC line is no longer protected from surges and the power strip must be replaced.
dealer for the defective product if repair or replacement is not commercially practical or cannot be completed in a timely manner. * * "Lifetime" • * means the duration of use of the product under normal circumstances and used in accordance with all instructions and warnings, and specifically such time as the product can no longer function after normal use for the specific purpose intended.
User Guide Before using your Austere product, review the full user guide at www.austere.com/user-guides. Retain all documentation for future reference. Product Registration In order to activate the Lifetime Guarantee on your Austere product, please go to www.austere.com/guarantee to register your product.
FORMAL GUARANTEE CLAIM HOW TO MAKE A CLAIM. In the event of a product irregularity or connected component damage, please comply with the following instructions: 1. Call Austere immediately after you discover a defect or connected component damage at 1-800-503-1037 or send a message directly to the Austere support team at support@austere.com for instructions on how to file your claim. 2.
@l)W @BeAustere #BeAustere AUSTERE.
