User Manual RKP1015 / 1017 LCD Keyboard Drawer - 1U dual slide - 15", 17" screen size
Contents Chapter 1 Getting Started 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 Important Safeguards..........................................................1 Regulatory Notice................................................................2 Package Contents...............................................................3 Before Installation...............................................................4 Unpacking....................................................................
Chapter 1 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover ■ ■ Any product, on which the serial number has been defaced, modified or removed.
Chapter 1 1.2 Regulatory Notice Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions ■ ■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Chapter 1 1.3 Package Contents 1 5 al User Manu 2 3 6 4 7 or 1 LCD keyboard drawer x 1 pc 2 Fasteners for rear L-bracket x 4 pcs 3 330mm rear mounting L-bracket x 1 pair * Mounting depth-adjustable from 390 to 920mm 4 CB-6 2-in-1 USB KVM cable x 1 pc or CD-6 3-in-1 PS/2 KVM cable x 1 pc 5 User manual x 1 pc 6 Power cord x 1 pc 7 Auto switch power adapter ( for external power version) x 1pc P.
Chapter 1 1.4 Before Installation ■ ■ ■ ■ It is very important to locate the LCD Keyboard Drawer in a suitable environment. The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into a suitable cabinet. Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Position LCD Keyboard Drawer with respect to related facilities. 1.
Chapter 1 1.7 Peripheral Products Item DB-15 KVM Cat5 KVM KVM Extender Model No.
Chapter 1 1.9 Installation ■ ■ Install each rear L-bracket using two fasteners shown in Figure 1. Leaving the fasteners slightly loose. Figure 1. Installing the rear L-bracket to the LCD keyboard drawer. ■ ■ Measure the front and rear mounting depth of the rack. Align each rear L-bracket to a suitable length and tighten the fasteners shown in Figure 2. Figure 2. Aligning the rear L-brackets to a suitable length for the rack. ■ Fixed the the LCD keyboard drawer into the rack.
Chapter 1 1.10 How to Use The Slides ■ A white arrow release button is located on the outside of each slide (shown in Figure 4). Figure 4. White arrow button. ■ Push the white arrow button on either side of the upper LCD drawer to unlock (shown in Figure 5). Avoid pressing the red button located on either side. Figure 5. Pushing the white arrow button. ■ Hold down the white arrow button until the upper LCD drawer is located in the rack (shown in Figure 6). Figure 6.
1.11 Locking Bracket for RKP1015 / 1017 series Chapter 1 ■ Release the locking bracket in Figure 8. ■ The locking bracket will spring open in Figure 9. ■ Flip up the LCD panel Figure 8. Figure 9. Figure 10. P.
Chapter 1 1.12 How to Use The Dual Slides ■ Gently pull the handle toward the front of the lower keyboard drawer (shown in Figure 11). Figure 11. Pulling the handle toward the front of keyboard drawer. ■ Push the handle toward the front of the upper LCD drawer (shown in Figure 12). Figure 12. Pulling the handle toward the front of LCD drawer. ■ Flip up the LCD to a suitable angle shown in Figure 13. Figure 13. Flipping up the LCD to a suitable angle. ■ Figure 14.
1.13 Connect to Server via USB Interface Chapter 1 Figure 15. Example of connecting CB-6 2-in-1 USB KVM cable to server via USB interface 1.14 Connect to KVM via USB Interface Figure 16. Example of connecting CB-6 2-in-1 USB KVM cable to KVM via USB interface Remarks ■ The above connection is only for the LCD keyboard without KVM switch built-in. ■ For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual. P.
1.15 Connect to Server via PS/2 Interface Chapter 1 Figure 17. Example of connecting CD-6 3-in-1 PS/2 KVM cable to server via PS/2 interface 1.16 Connect to KVM via PS/2 Interface Figure 18. Example of connecting CD-6 3-in-1 PS/2 KVM cable to KVM via PS/2 interface Remarks ■ The above connection is only for the LCD keyboard without KVM switch built-in. ■ For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
Chapter 2 2.1 On-screen Display Operation 15" LCD membrane 17" LCD membrane Membrane Switch Function Power light Green = On Orange = Power saving Power on / off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control Exit the OSD screen Shortcut key to auto adjustment by pressing the button for 5 seconds or Toggle analog, digital & video connection (DVI-D and video options only) P.
Chapter 2 2.2 On-screen Menu MAIN MENU BRIGHTNESS/CONTRAST AUTO ADJUST PHASE/CLOCK H/V POSITION MISC RESET BRIGHTNESS / CONTRAST Brighthtness: Adjust background black level of the screen image. Contrast: Adjust the difference between the image background (black level) and the foreground (white level). AUTO ADJUST Auto Adjust: Fine tunes the video signal to eliminate waviness and distortion. A "Adjusting" message is displayed during the process. Auto Tune: Optimize phase, clock, position and size.
Chapter 3 3.1 Specifications Item Description 1U rack mounting on slide-out rails Form Factor LCD Manufacturer 15" TFT 17" TFT 1024 x 768 1280 x 1024 Brightness (cd/m²) Min. 250 300 Color Support 16.2 Mil. 16.2 Mil. Contrast Ratio (typ.) 450:1 700:1 Viewing Angle (H/V) 130˚ x 100˚ 150˚ x 135˚ 304 x 228 337 x 270 3 2 Diagonal Size Max. Resolution Display Area (mm) Tr Response Time (ms) Analog RGB, 0.7Vp-p VGA Signal Input Separate H/V, Composite, SOG Sync.
Chapter 3 3.2 Keyboard & Mouse ■ ■ Multiple keyboard lanuage selections with touchpad Trackball is not available Supporting layouts Ne N keyboard integrated with touchpad P.
Chapter 4 4.1 KVM Options Our KVM is designed to seamlessly integrate into the rear of our full range of LCD drawer solutions: ■ ■ ■ ■ For KVM operation, please refer to "Integrated LCD KVM Switch" user manual Option with high desnsity Cat5 KVM with either 16 or 32 ports Option with cost efficient DB-15 KVM integration with either 8 or 16 ports Please ask your supplier for full KVM details 4.
Chapter 4 4.4 S-Video + BNC Input Option Internal power version S-Video External power version Remarks: ■ Package includes an extra 6ft S-Video cable P.
4.5 On-screen Menu for DVI, BNC, S-Video & RCA Input 1. 2. 3.
Chapter 4 4.6 DC Power Options Model 12V 24V 48V Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No load 50 mA 50mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.16A Efficiency 84% 85% 85% Input rating Input current Output rating Remarks: ■ Package does not include power cord and AC power adapter ■ With DC power option, the depth will be extended from 650mm (25.
Chapter 5 5.1 Troubleshooting 1. How do I adjust the resolution? To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are determined by the display card in your computer. 2. Is interference signal appeared on LCD normal when shutting down the computer ? In rare cases, interference may appear on the monitor.
Chapter 6 6.1 Dimensions Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight RKP1015 series 442 x 650 x 44 mm 17.4 x 25.6 x 1.75" 589 x 826 x 168 mm 23.2 x 32.5 x 6.6" 15 kg 33 lb 21 kg 46 lb RKP1017 series 442 x 650 x 44 mm 17.4 x 25.6 x 1.75" 589 x 826 x 168 mm 23.2 x 32.5 x 6.6" 16 kg 35 lb 22 kg 48 lb Model P.
The company reserves the right to modify product specifications without prior notice and assumes no reponsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2007 Austin Hughes Electronics Ltd. All rights reserved.