dedicated LCD display solutions User Manual 8.4” LCD AP-8 Aluminum front bezel NAP-8 Front NEMA4 / IP65 OP-8 Universal Mounting Open Frame Designed and manufactured by Austin Hughes UM-UV-621-8-Q215V1 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part. 1 > AP-8 / NAP-8 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.1 P.2 - 3 P.4 - 5 < Part. 2 > OP-8 2.1 2.2 2.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.6 P.7 - 8 P.9 < Part. 3 > Product Specifications & LCD OSD 3.1 3.2 Product Specifications On-screen Display Operation ( OSD ) P.10 - 11 P.12 < Part. 4 > Options 4.1 4.2 4.3 4.4 4.5 Option Table AV1.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
< Part 1 > < 1.1 > Package Content - AP / NAP-8 8.4" LCD Display AP-8 / NAP-8 8.4" LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Mounting hardware X 1 pack - Mounting bracket x 2 pcs - M4* 6mm screw x 4 pcs - M4* 50mm screw x 4 pcs Basic I/O Power VGA AV1.2 upgrade I/O Power S-Video BNC VGA Audio in - in - out PC Video - Options : S-Video + BNC, Audio UM-UV-621-8-Q215V1 P.1 www.austin-hughes.
< 1.2 > Structure Diagram - AP / NAP-8 1 2 Front view 3 4 AP-8 NAP-8 5 7 1 Rear case 2 LCD panel 3 3mm protective glass Rear view ( NEMA 4 / IP65 front protection for NAP series ) 4 6mm aluminum front bazel 5 Audio speaker ( for Audio or TV option ) 6 LCD membrane 7 Remote sensor 6 Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight AP-8 NAP-8 264.7 x 62.8 x 192 mm 10.4 x 2.5 x 7.6 inch 515 x 117 x 429 mm 20.3 x 4.6 x 16.9 inch 2.4 kg 5.
< 1.2 > Dimension - AP / NAP-8 8.4” LCD Display Front View Side View AP-8 NAP-8 Rear View UNIT : mm 1mm = 0.03937 inch Bottom View UM-UV-621-8-Q215V1 P.3 www.austin-hughes.
< 1.3 > Panel Mount Installation - AP / NAP-8 1 2 Mounting M4*6mm screw bracket 3 M4*50mm screw x 4 pcs x 2 pcs x 4 pcs Hardware set part no. UV-BK#1 Steps ■ ■ UM-UV-621-8-Q215V1 Install 2 mounting brackets with 4 x M4*6mm screws Adjust the LCD panel with 4 x M4*50mm screws and fix it on the surface. P.4 www.austin-hughes.
8.4” LCD Display < 1.3 > VESA mount Installation - AP / NAP-8 M4 screw VESA mount ( 75*75mm ) ■ UM-UV-621-8-Q215V1 Hardware and M4*4 pcs for VESA mount are not provided P.5 www.austin-hughes.
< Part 2 > < 2.1 > Package Content - OP-8 OP-8 8.4" LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Basic I/O Power VGA AV1.2 upgrade I/O Power S-Video BNC VGA Audio in - in - out PC Video - Options : S-Video + BNC, Audio UM-UV-621-8-Q215V1 P.6 www.austin-hughes.
< 2.2 > Structure Diagram - OP-8 8.4" LCD Display 1 Front view 2 OP-8 3 6 Rear view 1 Rear case 2 LCD panel 3 Audio speaker ( for Audio or TV option ) 4 Universal open frame mounting 5 LCD membrane 6 Extended remote sensor membrane cable 4 5 ( 66cm from AD board to sensor end ) Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight OP-8 261.7 x 56.8 x 189 mm 10.3 x 2.2 x 7.4 inch 515 x 117 x 429 mm 13.5 x 2.5 x 10 inch 1.5 kg 3.3 lbs 3.4 kg 7.
< 2.2 > Dimension - OP-8 Front View Side View OP-8 UNIT : mm Rear View 1mm = 0.03937 inch Bottom View UM-UV-621-8-Q215V1 P.8 www.austin-hughes.
8.4” LCD Display < 2.3 > Installation - OP-8 ( I ) Universal mount ( II ) VESA mount ( 75*75mm ) M4 screw Hardware and M4*4 pcs for VESA mounting are not provided UM-UV-621-8-Q215V1 P.9 www.austin-hughes.
< Part 3 > < 3.1 > Product Specifications Mechanical Design AP / NAP-8 OP-8 Front Panel Black, RAL 9005 - Rear Casing Black, RAL 9005 Black, RAL 9005 VESA Mounting 75 x 75mm 75 x 75mm Other Mounting Panel mount Universal mount 3mm protective glass - Protection LCD Panel Manufacturer Panel Size ( diagonal ) 8.4-inch TFT color LCD Display pixel ( dots x lines ) 800 x 600 Brightness ( typ. ) 250 Contrast Ratio ( typ.
8.4” LCD Display Physical Specification AP / NAP-8 OP-8 264.7 x 62.8 x 192 mm 261.7 x 56.8 x 189 mm 10.4 x 2.5 x 7.6 inch 10.3 x 2.2 x 7.4 inch 515 x 117 x 429 mm 515 x 117 x 429 mm 20.3 x 4.6 x 16.9 inch 20.3 x 4.6 x 16.9 inch Net Weight 2.4 kgs / 5.3 lbs 1.5 kgs / 3.3 lbs Gross Weight 4.3 kgs / 9.5 lbs 3.4 kgs / 7.
< 3.
< Part 4 > Options 8.4” LCD Display < 4.1 > Option Table Options AP / NAP OP S-Video + Composite ( BNC ) Audio Touchscreen DC Power TV * * Remote Controller ( 1 ) AV1.2 upgrade comes with RC-1 remote controller. ( 2 ) TV option comes with RC-2 remote controller. UM-UV-621-8-Q215V1 P.13 www.austin-hughes.
< 4.2 > AV1.2 Upgrade Options : ( S-Video + Composite, BNC ) - AV - Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers ) Audio Power S-Video BNC VGA in - in - out PC Video *** AV1.2 upgrade option comes with RC-1 remote controller x 1. How to Use RC-1 Remote Controller 5 1 2 3 6 7 4 8 9 1 POWER Switches on or off the TV 2 MUTE Turn on or off the speaker 3 INPUT Switch to signal input mode 4 0- 9 Select channels.
8.4” LCD Display < 4.3 > Options : Touchscreen & driver 8.
< 4.3 > Options : Touchscreen & driver TRB / TCB Driver Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc or download the driver from the link below : http://www.austin-hughes.com/downloads/UVDL/driver.html Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4. After installation, run the TouchKit program & the “4 point calibration” Please do the initial calibration after the first setup < 4.
< 4.5 > Options : TV ( Analog ) 8.4” LCD Display TV Power S-Video BNC VGA Audio in - in - out PC Video *** For TV option : ( 1 ) 1 x RC-2 remote controller included. ( 2 ) Casing dimensions will be changed. UM-UV-621-8-Q215V1 P.17 www.austin-hughes.
How to Use RC-2 Remote Controller 1 8 2 INPUT 3 4 MUTE 1 2 3 4 5 6 7 8 9 AUTO 0 -/-- VOL 9 CH 10 FREEZE 11 1 12 MENU 5 SELECT 13 ASPECT 14 6 SLEEP ENTER 15 16 7 BACK 20 SOURCE SWAP EXIT PIP POSITION PIP AUDIO 17 1 18 PIP 21 19 Water proof 1 INPUT 2 Switches on or off the TV 3 0-9 4 AUTO MENU 5 6 ▲ / ▼ / ◄ / ► / ENTER 7 BACK MUTE Vol + / CH + / FREEZE - / -ASPECT SELECT SLEEP EXIT 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Select the source PIP fu
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved. UM-UV-621-8-Q215V1 www.austin-hughes.