Intelligent Remote Power Management User Manual PPS-01, IP dongle GUI software MTS switched PDU MT monitored PDU Designed and manufactured by Austin Hughes UM-PPS-01-Q212V9 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Unpacking The equipment comes with the standard parts shown on the package contents. Check and make sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
Content < 1.1 > PDU meter setting & cascade P. 1 - 2 < 1.2 > IP dongle installation & connection P. 3 - 4 < 1.3 > IP dongle configuration P. 5 < 1.4 > PPS-01 IP dongle GUI Software P. 6 - 7 UM-PPS-01-Q212V9 www.austin-hughes.
< 1.1 > PDU meter setting & cascade LINK 1 OUT PDU cascade port DIP Switch DIP Switch CURRENT (A) 2 Current display 3 Dip switch 225 ON 1 4 DIP 2 3 4 5 6 7 8 Reset button RESET ■ For rackmount PDU, 2 3 4 on the front panel left , 1 on the rear panel Cascaded PDUs setting Using the dip switch no.
1st level PDU LINK 2nd level PDU CAT. 5 / 6 cable OUT LINK Up to 20 meters CURRENT (A) IP dongle ( refer to P.3 - 9 ) 1 2 3 4 5 6 7 ON 8 1 RESET ■ ■ ■ LINK Up to 20 meters 2 3 4 5 6 225 DIP ON 8 1 7 RESET DIP ON OUT CURRENT (A) 225 DIP ON CAT.
< 1.2 > IP dongle installation & connection To remote PDU over IP, users can order IP dongle : IPD-01 IP dongle for vertical PDU Vertical IP dongle installation steps : - slide the IP dongle on the plate above the meter - plug the RJ-45 connector of IP dongle into the LINK port of the 1st level PDU meter - use the CAT.
IPD-H01 IP dongle for rackmount PDU Horizontal IP dongle installation steps : - fix the IP dongle on the rear side of rackmount PDU with 4 screws - plug the RJ-45 connector of IP dongle into the LINK port of the 1st level PDU meter - use the CAT. 5 / 6 cable to connect IP dongle to network device To LINK port of the 1st PDU Rear side of rackmount PDU IP dongle To LAN port Customer’s network device ( router or hub ) UM-PPS-01-Q212V9 P.4 www.austin-hughes.
< 1.3 > IP dongle configuration After the completion of IP dongle connection, please take the following steps to configure the IP dongle : 1. Prepare a notebook computer to download the IP setup utilities from the link : www.austin-hughes.com/support/utilities/infrapower/IPdongleSetup.msi 2. Double click the IPDongleSetup.msi and follow the instruction to complete the installation. 3. Go to each first level PDU with the notebook computer & a piece of CAT.
< 1.4 > PPS-01 IP dongle GUI Software Each IP dongle provides a built-in GUI software, PPS-01, which allows user, via an I.E. web browser, to see PDU’s data and remotely manage the PDU over a TCP/IP Ethernet network. Each I.E. supports ONLY one IP dongle. If the user installs more IP dongles, multi windows will be required. PPS-01 is a management software but with very limited features. The user can use advanced software, InfraPower Manager IPM-01. Step 1. Open Internet Explorer ( I.E. ), version 6.
< Details > On / Off status of each outlet Remote on / off outlet ( MTS switched PDU only ) Rename outlet device, PDU and location Aggregate current on the PDU : save the changes - Data refresh every 10 seconds - Disable Refresh during data input : restart the PDU meter ( outlets are still activated ) : reload the PDU information < Setup > IP dongle configuration setting Password setting Network setting Hardware information provided : save the changes : reload the IP dongle to factory default ( Pres
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2012 Austin Hughes Electronics Ltd. All rights reserved. UM-PPS-01-Q212V9 www.austin-hughes.
