Owner's manual

www.austin-hughes.comUM-X-ISM-Q414V3 P.20

< 3.1 > PDU

InfraBox

For details about PDU level setting, please refer to IPM-03 user manual < 3.1 > :

http://www.austin-hughes.com/support/usermanual/infrapower/UM-IPM-03.pdf

Please visit below link to select desired PDU & download the PDU drawing & speciﬁ cations.

http://www.austin-hughes.com/solutions/intelligent-kWh-pdu.html#Single_Phase

1st level

PDU meter

4th ( last ) level

PDU meter

3rd level

PDU meter

2nd level

PDU meter

Cat 5 / 6 cable

Up to 20M

Cat 5 / 6 cable

Up to 20M

Cat 5 / 6 cable Up to 20M

Cat 5 / 6 cable

Up to 20M

Step 1 - Press the & button to display no.9 and press to conﬁ rm

Step 2 - Press the & button to PDU ID and press to conﬁ rm

Step 3 - In display 9.1, Press the & button to select PDU level no.1 - 4

and press to conﬁ rm

Step 4 - Press to exit

PDU level setting :

Under an InfraSolution X network, each InfraBox supports InfraPower intelligent PDU x 4 in a daisy chain.

Each PDU comes with Temp. & Humid. sensor port x 2

W series : monitored PDU

WS series : switched PDU

WSi series : outlet level measurement switched PDU

Max. daisy chain distance from InfraBox to the 4th PDU up to 80M

( Neglect Group no. in display 9.1. It’s not appliable to InfraSolution X Software )