Owners Manual

N/4
TYRES
AND
Fig.
4.
Front position for screw jack.
A.
Front
suspension spring plate.
B.
Jack platform.
C. Front suspension lower wishbone arm.
The Under-Axle Type of Screw
Jack
This type
of
jack
is
used for the Commercial models.
For
the
front
wheels the lifting platform
of
the
jack
should be placed across the outer
rim
of
the spring
recess
in
the spring plate.
For
lifting the rear wheels, place the lifting platform
across the lowest spring leaf, to the rear
of
the axle,
with the lipped end
on
the outside
of
the lower plate,
JACKING
Fig. 5. Rear position for screw jack.
A.
Rear spring
"U"
bolt.
B.
Jack platform lip.
so
that
the fiat end is between the
bottom
wishbone links
and
the lipped end projects into the spring
and
up
against the spring U-bolt ; this avoids any turning
movement.
A long handle is required to operate the
jack
and
this
is
obtained by joining together the provided exten-
sion
bar
and
starting handle, the latter being the turning
medium.