SDS
SAFETY DATA SHEET
Revision: 0
Effective Date: 06/06/16
Page 2 of 5
SECTION 2. HAZARD(S) INDENTIFICATION (CONTINUED)
Carcinogen Status:
OSHA: No NTP: No IARC: No
Skin:
No evidence of harmful effects from available information.
Inhalation:
No significant irritation expected from a single exposure. May be harmful if inhaled.
May be corrosive to respiratory passages.
Oral:
Small amounts transferred to the mouth by fingers during use, etc. is not likely to
cause harmful effects. Swallowing large amounts may be harmful and cause burns of
the mouth, throat and stomach, discomfort, nausea, vomiting and diarrhea.
SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS
CAS Number:
Weight (%):
Component Name:
70356-09-1
3 %
Butyl Methoxydibenzoylmethane (Avobenzone)
118-60-5
5 %
Ethylhexyl Salicylate (Octisalate)
118-56-9
10 %
Homosalate
6197-30-4
2.75 %
Octocrylene
64-17-5
> 74 %
SD Alcohol 40-B (Alcohol Denat.)
N/A
< 6 %
Other Non-Hazardous Ingredients
Comments: Hazardous ingredients are listed if they comprise 1.0% by weight. "Special Hazardous Substances or
Carcinogens" are listed if they comprise 0.1% by weight.
SECTION 4. FIRST-AID MEASURES
Eye Contact:
Rinse with water to remove. Remove contact lenses, if used. Flush immediately with plenty
of water for 15 minutes. Get medical attention if needed.
Skin Contact:
No first aid should be needed.
Inhalation:
Remove person to fresh air. Increase ventilation.
Inhalation of high concentrations of this material, as could occur in enclosed spaces or
during deliberate abuse, may be associated with cardiac arrhythmias.
Ingestion (Oral):
Do not induce vomiting. Rinse out mouth with water. Contact Poison Control Center. If
possible do not leave individual unattended.
Comments:
Always consult a physician. Treat according to person's condition and specifics of exposure.
SECTION 5. FIRE-FIGHTING MEASURES
Flash Point:
Approximately 69° F (21° C)
Auto-ignition
Temperature:
No data available.
Flammability Limits in Air:
Do not use near fire, flame, or sparks. Do not store at temperatures above 120 °F. The
container contains flammable ingredients. If container is broken, flammable liquid will
be released. Never use welding or cutting torch on or near cans (even empty) because
product (even just residue) can ignite explosively. During fire, irritating or toxic
decomposition products may be generated.