Specifications

PAGE 9AUDIO CONTRACTOR TOOLS INSTALLATION AND OPERATION MANUAL
MIXED UP AND THE INJECTOR
1
BALANCED MICROPHONE LEVEL XLR INPUT
CONNECTORS
2 off
2
UNBALANCED LINE LEVEL STEREO RCA INPUT
CONNECTORS
2 off, mono summed
3
BALANCED MICROPHONE LEVEL XLR OUTPUT
CONNECTOR
4
FOUR LEVEL CONTROLS
Adjusts the level of the audio signal of the respective source in the
output mix
4 CHANNEL PASSIVE MIXER
The MIXED UP is a passive 4 channel mixer which features 2 balanced XLR microphone inputs & 2 dual RCA line inputs & a single microphone level balanced XLR
output. The MIXED UP also offers individual front panel level controls per input.
PASSIVE DI
The THE INJECTOR is a passive direct injection box which offers a 6.35mm input, 6.35mm thru output (direct) & a balanced XLR output.
The INJECTOR also features ground lift switching for elimination of hum & a three stage pad offering up to 40dB of attenuation.
1
UNBALANCED LINE LEVEL
6.35mm jack socket input connector
2
UNBALANCED LINE LEVEL
6.35mm jack socket output connector (in parallel with jack input
connector)
3
BALANCED LINE LEVEL XLR OUTPUT
CONNECTOR
4
GROUND LIFT SWITCH
Pin1 lift on transformer isolated XLR output. Set to “GND” to connect pin
1 of output XLR connector to pin 1 of input XLR connectors. Set to “Lift”
to disconnect pin1 output XLR connector
5
PAD SWITCH
Set to “0dB’ to allow the audio signal to not be attenuated. Set to
“-20dB” to reduce the signal level on the XLR output connector by 20dB.
Set to “-40dB” to reduce the signal level on the XLR output connector
by 40dB
1
1 2 3
2 2 31
4 5
4
REAR PANEL
FRONT PANEL
REAR PANEL
FRONT PANEL