User Manual

1 ZONE select
2. CLEAR
3. ALL PAGE
4. ZONE PAGE
5. BUSY
These buttons allow selection of zones for paging.
When selected, the adjacent LED glows green.
Pressing the button again deselects the zone. The area
next to the button is for labelling the zone. Selecting a
zone does not instigate paging. See 4. ZONE PAGE.
This button clears all the selected zones.
This button pages to all zones. It is momentary so must
be held while talking into the microphone. It activates
the microphone and mutes the program sources. It
does NOT clear the current zone selection
configuration so the paging station will return to its
previous state (selected zones) once the ALL PAGE
button is released.
This button pages to the current zone selection
configuration as indicated by the ZONE select LEDs
see 1 above. The zones being paged have their
program sources muted and the microphone
becomes active. If no zones are selected the system
will still show as busy when this button is pressed.
This LED glows when the network or system is busy. This
can be caused by the local paging station (you are
making a page) or by another paging station. Paging
is not possible while the system is busy, however zone
selections can still be made.
Controls
Introduction
The Australian Monitor Installation Series DigiPageJrM8 and DigiPageJrM16 Paging Stations
are 8 and 16 zone paging stations complete with a slimline gooseneck paging microphone.
The Paging stations are designed to be used with the DigiPageJr Zone Paging & Source
Selection System and will allow paging into any individual zone, any combination of zones or
All Call to all zones. LED indicators provide the user with visual feedback of the zones being
paged or if the sytem is busy. Label space is provided on the Paging Station, which also
provides a microphone gain control. Connection to the DigiPageJr is via low cost CAT 5
cable and as with all Australian Monitor installation products, the Paging Station provides an
elegant solution at a contractor friendly price.
7. PAGING STATION
Base Plate
section
6
18
DigiPageJrM8
DigiPageJrM16
CLEAR
BUSY
ALL PAGE
ZONE PAGE
DigiPageJrM16
INSTALLATION SERIES
Austr alian Monitor
1
2
3
4
5
115.0mm
178.0mm
INSTALLATION SERIES
Australian Monitor
NOTE: Remeber to wait 1 sec for the pre-announce chime to finish.
NOTE: Remeber to wait 1 sec for the pre-announce chime to finish.