User guide

The Australian Monitor EQ302 is a dual 30 band, 1/3 octave, constant Q graphic equaliser suitable for both permanent
installation and PA use. The equaliser is housed in a 19” 3 RU rack mount format.
Features include;
• Dual channel graphic equaliser providing +/- 15 dB cut / boost on each of the 30 ISO frequency bands.
• Centre detent bypass on 45 mm faders. When any fader is in its centre detent position, the filter is automatically
bypassed.
• High pass filter, frequency adjustable from OUT (flat) up to 250 Hz.
• LF Contour smooth shelving filter, +/- 6 dB of gain at 50 Hz
• HF Contour smooth shelving filter, +/- 6 dB of gain at 14 kHz
• GAIN control for overall unity adjustment. Variable from - infinity to +10 dB
• Triple-point LED clip detector that indicates when the internal signal is clipping at either the EQ filter, HF/LF contour or
gain sections of the equaliser.
• Precise LED metering indication. When the EQ switch is out, the LED meter indicates the input signal level.
When EQ switch is in, the LED meter indicates output signal level.
• Relay bypass. When the EQ is turned off or the power fails, an internal relay switches the input signal directly
to the output of the equaliser thus effectively bypassing the unit and maintaining a signal pathway.
• The bypass relay also provides a delay on power up to prevent audio clicks and thumps being generated by the
unit during boot up.
• Standard 3 RU 19” frame.
• Multiple balanced interface connectors. XLR, 6.35 mm jack (TRS) or Phoenix pluggable screw terminals are provided
at both the input and output terminals.
PAGE 4
EQ302 INSTALLATION AND OPERATION MANUAL
FEATURES