Specifications

PAGE 5AMIS MP8 INSTALLATION AND OPERATION MANUAL
21 3 4
1
Power Socket
This 2.1mm socket accepts AC or DC voltage between 12V and 24V. For DC,
tip is positive.
2
24VDC In Binding Posts
These binding posts provide connection for 24V emergency systems and is
not switched by the front panel power switch. The 24VDC IN does not provide
trickle charge facility.
3
Input Terminal Strip
Paired connection from each amplifier in the system. The label AMP ‘X’
corresponds with AMPLIFIER ‘X’ on the selector switches.
4
Output Terminal Strip
Paired connection to each zone speaker distribution, wired in parallel with input
terminal strip.
NOTE: The terminal lug accepts wire gauges from AWG22 (0.75mm)
up to AWG16 (1.5mm). Each terminal is rated at 15A/300VAC.
NOTE: The MP8 will accept input from both constant voltage systems
and low impedance systems or a mixture of the two.
REAR PANEL