Specifications

AMIS MP8 INSTALLATION & OPERATION MANUAL PAGE 5
REAR PANEL
POWER SOCKET
This 2.1mm socket accepts AC or DC
voltage between 12V and 24V. For DC, tip
is positive.
24VDC IN BINDING POSTS
These binding posts provide connection
for 24V emergency systems and is not
switched by the front panel power switch.
The 24VDC IN does not provide trickle
charge facility.
INPUT TERMINAL STRIP
Paired connection from each amplifier in
the system. The label AMP ‘X’
corresponds with AMPLIFIER ‘X’ on the
selector switches.
OUTPUT TERMINAL STRIP
Paired connection to each zone speaker
distribution, wired in parallel with input
terminal strip.
NOTE: The terminal lug accepts
wire gauges from AWG22
(0.75mm) up to AWG16 (1.5mm).
Each terminal is rated at
15A/300VAC.
NOTE: The MP8 will accept input
from both constant voltage
systems and low impedance
systems or a mixture of the two.
2
☛
☛
1
4
2
3
1 3 4