Specifications
I 2 
Installotion
Output 
Wiring
When 
wiring 
to 
your 
speakers  always 
use 
the 
largest
gaugewire 
yourconnectorwill 
accept. 
The 
longerthe
speaker  lead 
the 
greater 
the losses 
will 
be, resulting
in reduced 
power 
and 
less damping 
at the load. 
We
recommend 
using 
a heavy duty 
two 
core flex 
(four
core 
flex if 
bi-amping) 
10 
to 12 
gauge 
(2mm2 
to
2.5mm2 or 
50/0.25 
or equivalent) 
as 
a minimum.
Binding 
Post 
Outputs
When 
terminating 
to the 
4 mm 
binding 
post 
(banana
jack) 
output 
connectors, 
banana 
plugs 
or 
bare wires
can 
be used. 
The red 
terminal 
is 
positive 
and 
the
black 
terminal 
is 
negative 
(ground).
lf 
running 
in 
BRIDGE 
mode, 
only the 
red 
binding
posts 
are 
used. 
Channel  A 
provides 
the 
positive
outputtothe 
load 
and channelB 
providesthe 
negative
output 
to the load.
SPEAKON 
Outputs
When 
using the NEUTRIK 
SPEAKON 
(NL4MP) 
con-
nector 
for speaker 
output, use 
only 
the 
mating
NEUTRIK 
NL4FC 
in-line 
connector. 
This 
connector
is designed 
so that 
both channels 
can be fed 
from 
a
single 
connector.
Two 
SPEAKON  connectors 
are 
provided 
on the
amplifier.
The "Channel 
A" 
SPEAKON actually 
carries 
both
channelA 
& 
channel B outputs 
(se 
e Figure 
5: 
Speakon
Connector 
Wiring 
Diagrams).
The "Channel 
B" SPEAKON canies the 
Channel B
output 
only.
This 
anangement 
allows 
you 
the option of 
connect-
ing 
to the outputs 
separately  ortogether. 
Connecting
through 
a single 
connector  has 
the advantage 
of
minimising 
connections, 
preserving 
phasing 
and
simplified 
channel 
allocation, 
which  is 
particularly
important 
when 
bi-amping 
or in bridge  mode.
IMPORTANT
Do not 
overload 
your 
amplifier 
by 
connecting 
the
channel 
B 
output  twice!
Channel 
A is used 
as 
the 
"dominanf 
channel 
and
when 
sourcing 
a dual 
output  from 
Channel 
A the
following 
standard 
should 
be used:
Channel A 
= 
Left 
or 
Low 
Frequencies.
Channel B 
= 
Right 
or High Frequencies.
\A/hen in 
bridge mode:
Pin 1+ 
= 
Bridge 
Output 
Positive
Pin 2+ 
= 
Bridge 
Output Negative.
BI.AMP 
CONNECTION
Figure 
5. 
"Speakon" 
Cannector Wring 
Diagram
SINGLE  CONNECTION
CH 
A/LEFI
OR
CH 
B/RIGHl
BRIDGED 
CONNECTION
DUAL 
CONNECTION
CHA
SPEAKON
ltu










