INTRODUCTION The Australian Monitor Pro Series SM12 and SM16 stereo console mixers are designed to be compact, ultra low noise and feature packed. MONO CHANNELS With a mixture of mono channels featuring balanced XLR or TRS inputs STEREO CHANNELS and switchable 48V phantom power, and stereo channels all boasting 3 stage E0 and pre and postlader auxiliary sends, the SM series MASTER SECTION mixers are as versatile as they are cost effective.
@ MIC/LINE INPUT SECTION uro This mid range E0 control adiusts mid {$ r',lrc range frequencies and has a fixed Balanced XLR input octave bandwidth at 2.5kHz. This control 2 will give up to l5dB of boost or cut. The centre position will give a flat response. "@ For i:if.,rl""r,*,. unhland u* pi. 1 ad pin 3 $ @^,_ hv€ L b r-ow This low frequency shelf E0 control adjusts bass frequencies and will give bndg€d up to 1 5dB of boost or cut at 80H2.
- LINE INPUT SECTION AUXIL!,E.RY STfTiCN @ lrxr @ rcr r-rn split of the channel These 6.35mm TRS lacks will accept Aux either balanced or unbalanced line input signal and is post E0 but pre the level signals. For mono operation use channel fader. 1 is a mono left input only. ts, Fosr of sbrco 1/4"lack plu96 Unbalaned u3e of mono t/4-jack plugs Balanced u3e TiP = Tip = Aux 2 is a mono split of the channel input signal and is post E0 and post Sigml channel fader.
ffi i*te.:.- ta*>; output. This level is independent of These TRS 6.35mm jacks provide a stereo the Master Mix. output that can be sent to a local monitor f'J;* w amp and speakers for control room or bio PC$JEF? LEX This LED indicates that the mixer is "on" box monitoring of either the PFL buss or the master output buss. @ Balaned use of stereo l/4"iack plugs Rins +e*v This LED indicates that 48 volt phantom power is active. = A L.
Balanced use of stereo 1/4" jack plugs Tip = hot (+vs; Ring cold (-ve) Sleeve = Ground / Shield ffi :t.l=r-ar* 1-i t.,.'4 *?e '{=z ?{.4': +i An insert point is provided for each Tip Ring Mono Channel on the SMl2 and SM16 Sleeve mixing consoles.
- : Fi tEEffi.ffi] @ Et tr,+t=LEL=lElgF-t \--./ PTPPTF @]qEElEll l'l_ E EE rAPE OUTPUT L&R @€l INPUT -l_ L&R I't GbJ+jt-h.EE.uE.LlE.O,|@; O' |O,I @, oir CI'r Or o"r eJ'o* i6 6 |(b:ro Before connecting any input sources to your SM12 or SM16 stereo console mixer, please make sure the following initial settings are correct. . All gain controls and faders are set to minimum . All Auxiliary sends are set to minimum . . . E0 is set flat (i.e.
a u z o X oo zz UUZ @6 I= UL xxH t'urt UAY F,, r>f Fr,Fr' F,, 99 F cJL tCi! crJ+ Efi 55 5; -" F" r' a uj z <_ oo- JJ o lllpl cc J tr F o lc; IU la IU r
MONO INPUT5 Mic Electronically balanced, discrete input configuration lnput Bandwidth 10Hz to 60kHz t 3dB Distortion (THD & N) 0.01% at + dBu, lkHz, Bandwidth 80kHz -129.5d8u, l50O source Mic E.l.N. (22H2-22kHzl -1 l7.3dBqp, I 50C) source -132.0dBu, input shorted -1 GAIN range 22.0dBqp, input shorted +10d8 to +60d8 Line lnput Electronically balanced Bandwidth 1()Hz Distortion (THD & N) to 60kHz r3dB 0.
