Instruction manual

DUAL TARIFF MODE
Step 1 - Activation of Dual / Multiple Tariff
Press and hold mode/set button for three seconds. On release you will see the voltage setting
flash. Press mode/set button twice and you will move onto the tariff selection setting. Now you
will see the symbol 1 flash. Press backward and forward buttons to select dual or multiple
tariff setup (you can select up to four tariffs). Push mode/set button to confirm.
Step 2 - Set Start & End Time For Tariff 1
Set the start time for Tariff 1 first using backward and forward buttons. Set the hours and
press mode/set button to save and move to minute set up. Set minutes using backward
and forward buttons and pushing mode/set button to confirm. Now the FROM symbol will
disappear from the monitor and the TO symbol will appear. Repeat the process for setting the
time Tariff 1 ends. Continue to set the FROM and TO timings for other tariffs.
Step 3 - Set Tariff 1 Rate
Use backward and forward buttons to input the cost per kWh and press the mode/set button
to save your setting. Tariff 2 setup will flash.
Step 4 - Set Tariff 2 Rate
Use backward and forward buttons to input the cost per kWh and press the mode/set button
to save your setting.
Step 5 - Set Tariff 3 & 4 Rate
Use backward and forward buttons to input the cost per kWh and press mode/set button to
save your setting. Repeat the process for tariff 4. You will always set one period of settings less
than the number of tariffs you have selected as the remaining period will be saved automatically.
15 16
MONITOR SETUP
The lower part of
the screen shows
the estimated
cost and carbon
emissions per day
ENERGY NOW MODE
Push the mode/set button to change information displayed from kW to cost (displayed in $).
Shows the
instant power
in kilowatts
When your elite is in the ENERGY NOW mode, this PEAK symbol appears when the
most expensive tariff is in use.