User Guide

ManualsBrandsAustralian Monitor. ManualsOtherTX8000

Clever Features, Contractor Friendly

TX8000

8 Channel Mic/Line Mixer

Operating Manual

TX8000, 8 Channel Mic/Line Mixer

Product Description

The TX8000 is a single rack height, 8 channel mixer suitable for desk or 19” rack mounting. Inputs 1-6 are

dual balanced microphone/auxiliary inputs while inputs 7-8 are balanced microphone inputs only. Each

input channel has individual gain, trim, bass & treble controls. The TX8000 has a separate master output

level control. The TX8000 will operate from 115 VAC 60 Hz or 24 VDC & also features a remote VCA for

the Master Volume.

Summary of content (7 pages)

PAGE 1
Clever Features, Contractor Friendly TX8000 8 Channel Mic/Line Mixer Operating Manual TX8000, 8 Channel Mic/Line Mixer Product Description The TX8000 is a single rack height, 8 channel mixer suitable for desk or 19” rack mounting. Inputs 1-6 are dual balanced microphone/auxiliary inputs while inputs 7-8 are balanced microphone inputs only. Each input channel has individual gain, trim, bass & treble controls. The TX8000 has a separate master output level control.
PAGE 2
Front Panel Features Input Level Controls The 6 dual mic/line input controls are marked Ch 1 through Ch 8 and should be adjusted to provide the required mix level for each individual channel. Start with the controls set to level 0 and turn the controls slowly clockwise until the desired mix for each channel is obtained. Each of the inputs is also equipped with an input sensitivity control which is located on the input PCB of the TX8000.
PAGE 3
consistently indicating red, then the mixer is being overdriven which will result in distortion. Avoid operating the mixer with the red LED’s illuminated. Rear Panel Features AC Power Inlet The 3 pin IEC power inlet is located on the left side of the rear panel and accepts a standard mains power lead fitted with an IEC connector. The operating voltage is 115 VAC @ 60 Hz. The AC power voltage is not externally user adjustable but is factory preset.
PAGE 4
Line Inputs The TX8000 includes six dual RCA inputs (channels 1-6) for unbalanced line or aux devices such as tape recorders, video players, tuners etc. An internal trim control is provided for each input (see the ‘Other Internal Adjustments’ section of this manual). Dual RCA connectors are provided to allow for the simple connection of domestic stereo devices such as tape desks and CD players.
PAGE 5
TX3010 Muting Module: Provides muting from channel 1 only. When activated, all other channels are muted TX3014 Muting Module: Provides dual priority muting. Channel 1 mutes 2-8. Channel 2 mutes 3-8. Input Sensitivity Adjustment: An internal trim adjustment is provided inside the TX8000 behind each XLR input. This trim control allows the input sensitivity to be adjusted for either very high level or low level inputs.
PAGE 6
12. Do not use the unit near stoves, heat registers, radiators, or other heat producing devices. 13. Do not block fan intake or exhaust ports. Do not operate equipment on a surface or in an environment which may impede the normal flow of air around the unit, such as a bed, rug, weathersheet, carpet, or completely enclosed rack. If the unit is used in an extremely dusty or smoky environment, the unit should be periodically “blown free” of foreign matter. 14. Do not remove the cover.
PAGE 7
E-mail: international@australianmonitor.