VGA44 4 X 4 VG A M AT R I X S W I TCHER I N S TA L L AT I O N A N D O P E R AT I O N M ANUAL r 4 4 A VG G 4x4 V VGA44 manual.
I M P O RTANT SAFETY INFORMATION 1. Save the carton and packing material even if the equipment has arrived in good condition. Should you ever need to ship the unit, use only the original factory packing. 2. Read all documentation before operating your equipment. Retain all documentation for future reference. 3. Follow all instructions printed on unit chassis for proper operation. 4. Do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. 5.
INTRODUCTION AND CONTENTS The AMAV VGA44 is an 4x4 VGA Matrix Switcher, supporting resolutions of up to 2048x2048. Designed for the demanding commercial audio-visual market, the VGA44 provides comprehensive video switching in an elegant, rack-mount package. The VGA44 provides four VGA video input sources and four VGA video destination outputs each featuring a 15 pin high density D connector.
F R O N T & R E A R PA N E L FRONT PANEL VGA44 4x4 VGA Matrix Switcher 4 1 1 3 Power ON Switch This power switch turns the unit on and off. The inbuilt LED will illuminate red to indicate that the switcher is ON and is receiving power 2 4 Source Select Buttons 2 3 A separate UP and DOWN source select button is provided for each destination output. A 7 segment LED display will indicate the input source number assigned to a destination output.
A D VA N C E D F E AT U R E S RS232 Front Panel Lock The AMAV switcher can be controlled via the RS232 serial control port to allow for interfacing to a PC, Crestron or similar third party control system. . The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit – this is often referred to as 9600 8N1. When the unit recognises a complete command it will perform the requested action – there is no delimiter character required.
O P E R AT I O N Before making any connections to the VGA44, observe the following: > Before making any connections to the VGA44, observe the following: > Ensure the mains voltage supply matches the label on the supplied plug-pack (+/- 10%) > Ensure that the power switch is OFF > Ensure that all system grounds (earth) are connected to a common point.
S P E C I F I C AT I O N S Video Inputs 4x VGA video (HD-15 pin connectors) Video Outputs 4x VGA video (HD-15 pin connectors) Video Bandwidth >450MHz Video Resolution 2048x2048 Maximum Video Crosstalk Control >60dB Front Panel, IR Remote, RS232 RS232 Control Power 9600 Baud, No Parity, 8 data bits, 1 stop bit +12V DC, centre +ve, outer –ve, 450mA Max Dimension (H x W x D) 44mm x 440mm x 200mm SHIPPING DimensionS (H x W x D) 98mm x 510mm x 283mm Shipping Weight V G A 4 4 I N S TA L L
AUSTRALIA AND NEW ZEALAND w w w. a u s t r a l i a n m o n i t o r. c o m . a u SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH AUCKLAND (NSW & ACT SALES) (VIC & TAS SALES) (QLD SALES) (SA & NT SALES) (WA SALES) (NZ SALES) 1 Clyde Street Silverwater NSW 2128 Private Bag 149 Silverwater NSW 1811 Phone: (02) 9647 1411 Fax: (02) 9648 3698 Email: nsw@audiotelex.com.
