INSTALLATION AND OPERATION MANUAL XRS SERIES POWERED AND PASSIVE LOUDSPEAKERS
IMPORTANT SAFETY INFORMATION PRÉCAUTIONS DURANT UTILISATION 1. Read these instructions. 1. LISEZ ces instructions. 2. Keep these instructions. 2. Tenez ces instructions. 3. Heed all warnings. 3. Notez tous les avertissements. 4. Follow all instructions. 4. Suivez toutes les avertissements. 5. Do not use this apparatus near water. 5. N’utilisez pas ce produit près de l’eau (la piscine, la plage, le lac, etc.). 6. Clean only with dry cloth. 6. Nettoyez seulement avec une étoffe sèche.
INTRODUCTION AND CONTENTS XRS SERIES INTRODUCTION 3 Building on the reliability and sonic quality of the very popular XR speaker series, Australian Monitor brings you the XRS two way injection moulded speaker enclosures with more features and new aesthetic to suit both live sound reinforcement and permanent installation.
XRS FRONT PANEL – ALL VERSIONS 1 2 1 High Frequecy Driver Horn loaded compression driver. Dispersion 90 H x 90 V. Passive crossover in the passive and constant voltage XRS varients. XRS8 1.5” XRS10 1.5” XRS12 2” Active crossover and power amp in XRS powered varients.
XRS REAR PANEL – PASSIVE AND CONSTANT VOLTAGE XRS8 B shown here XRS8 ODV XRS8 ODV 2 Way Full Range Speaker Weather Proof 100V/70V XRS8B Frequency Response (-3dB) Sensitivity (dB 1W 1m) Impedance Recommended Max Power (Program) 2 Way Full Range Speaker Built-in Passive 2 Way Crossover 2+ 2- 1- 1+ Frequency Response (-3dB) Sensitivity (dB 1W 1m) Impedance Recommended Max Power (Program) 65Hz-18kHz 92 dB 8 Ohm 200W 1+ 1- : INPUT SN: SN: 65Hz-18kHz 92 dB 8 Ohm 200W 100V 100W/70V 50W 100V 50W/70
XRS REAR PANEL POWERED VERSION 7 10 2 8 11 4 9 12 6 1 Mic In This is a balanced XLR microphone input. 2 Mic Signal This is a green LED signal present indicator for the Mic input. It indicates signal present on the input and is not affected by the level control. 1 3 5 3 Line In This is a balanced XLR line level input. 4 Line Signal This is a green LED signal present indicator for the Line input. It indicates signal present on the input and is not affected by the level control.
MOUNTING & ACCESSORIES MOUNTING When mounting via a bracket or eyebolts the following must be considered. The mounting of a permanently installed speaker may be dangerous unless undertaken by a qualified professional with the required experience. Walls and mounting surfaces must be capable of safely and securely supporting the load of the speaker and bracketry. Fixings must be safely attached to both the speaker and the wall or surface the speaker is to mount off.
SPECIFICATIONS XRS8 B/W XRS10 B/W XRS12 B/W 8 Ohms 8 Ohms 8 Ohms 100 watts, 200 watts 250 watts, 500 watts 300 watts, 600 watts Sensitivty (1 W / 1 M) 92 dB 95 dB 97 dB Calculated max SPL 118 dB 125 dB 128 dB 90 H x 90 V 90 H x 90 V 90 H x 90 V Frequency Response (-3dB) 65 Hz - 18 kHz 55 Hz - 18 kHz 50 Hz - 18 kHz Frequency Response (-10dB) 60 Hz - 20 kHz 50 Hz - 20 kHz 40 Hz - 20 kHz Speakon Speakon Speakon 1 x 8” Woofer, 1 x 1.5” HF Driver 1 x 10” Woofer, 1 x 1.
SPECIFICATIONS XRS8 P XRS10 P XRS12 P 118 dB 121 dB 125 dB 90 H x 90 V 90 H x 90 V 90 H x 90 V Frequency Response (-3dB) 65 Hz - 18 kHz 55 Hz - 18 kHz 50 Hz - 18 kHz Frequency Response (-10dB) 55 Hz - 18 kHz 50 Hz - 18 kHz 40 Hz - 20 kHz Class AB Class AB Class AB Power Requirements AC 120V/240V 50/60Hz AC 120V/240V 50/60Hz AC 120V/240V 50/60Hz Power Output 100 W (LF) + 50 W (HF) 100 W (LF) + 50 W (HF) 300 W (LF) + 100 W (HF) 3 Pin XLR 3 Pin XLR 3 Pin XLR 1 x 8" Woofer, 1 x 1
SPECIFICATIONS XRS8 ODV XRS10 ODV XRS12 ODV 8 Ohms (Bypass) 8 Ohms (Bypass) 8 Ohms (Bypass) 100 watts 250 watts 300 watt Sensitivty (1 W / 1 M) 92 dB (8 Ohm Bypass) 95 dB (8 Ohm Bypass) 97 dB (8 Ohm Bypass) Calculated max SPL 118 dB (8 Ohm Bypass) 125 dB (8 Ohm Bypass) 128 dB (8 Ohm Bypass) 90 H x 90 V 90 H x 90 V 90 H x 90 V Frequency Response (-3dB) 65 Hz - 18 kHz (8 Ohm Bypass) 55 Hz - 18 kHz (8 Ohm Bypass) 50 Hz - 18 kHz (8 Ohm Bypass) Frequency Response (-10dB) 60 Hz - 20 kHz
NOTES XRS SERIES INSTALLATION AND OPERATION MANUAL PAGE 11
ENGINEERED BY AUSTRALIAN MONITOR Address: 1 Clyde Street, Silverwater, Sydney NSW 2128 Australia. Private Bag 149, Silverwater NSW 1811 ABN 78 001 345 482 Website: www.australianmonitor.com.au International enquiries email: international@australianmonitor.com.au DISTRIBUTED IN AUSTRALIA AND NEW ZEALAND BY HILLS SVL www.hillssvl.com.au NSW P: 02 9647 1411 E: nsw@hillssvl.com.au QLD P: 07 3852 1312 E: qld@hillssvl.com.au ACT P: 02 6260 4544 E: act@hillssvl.com.au WA P: 08 9204 0200 E: wa@hillssvl.com.
