User Guide

Pallas 6 english
Heating in between seasons
Heating the stove in between seasons, when the
outside temperatures are higher, the flue gases
are not able to escape completely and this may
lead to disturbances in the chimney draught,
especially if the temperatures are rising suddenly.
The stove has to be charged with less wood and
the primary air has to be increased so that the
wood can burn down faster (with visible flames)
and thus the chimney flue can stabilize.
Chimney fire
Chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel are
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have
an expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description Nr. drawing Part number
Flat gasket 8 x 2 mm 13 710096
Round hollow round gasket 6 mm 14 710696
Round glas fibre gasket 14 mm 15 710338
Keramott
Description Nr. drawing Part number
Bottom Keramott left 1 712766
Bottom Keramott right 2 712767
Bottom Keramott centre 3 712760
Rear left, Keramott 4 712761-A
Rear right Keramott 5 712761-B
lateral Keramott right 6 712763
lateral Kermott left 7 712762
Keramoot baffle plate 8 712764
Keramott wood retainer 7 712765
Other parts
Description Nr. drawing Part number
Pallas door glass 10 712759
Door Handle 11 712786
BA1 spring 12 715641
Stove lacquer -- 650002
Stove lacquer aluminium -- 650003
Wood/coal igniter -- 640067
Glass cleaner ½ litre -- 640070
Accessories
You can obtain floor plates of glass or steel, fireplace utensils, care products or the Heat Memory System
for heat storage from your certified dealer.
IMPORTANT: Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if
necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned
regularly by the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection
intervals. An expert should inspect the stove annually.
7
5
3
4
8
9
1
2
6
order of Keramott installation acc. to numbering