User's Manual

Wireless Autani Transceiver (WAT2)
Users Manual
1. Description
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani Corporation. Any use of this
information without the expressed written consent of Autani Corporation is prohibited.
3 of 14
1. Description
The Wireless Autani Transceiver (WAT2) provides a cost-effective RF transceiver for 2.4 GHz
IEEE 802.15.4 wireless networks. The WAT2 is based on the Ember EM250 System-on-a-chip
(SoC) and it has been designed to support larger, denser, sleepier, more mobile, secure, and
resilient wireless networks.
Features
 Design for EmberZNet networks
 Miniature footprint: 1.000” x 0.800”
 Integrated PCB antenna
 16 RF channels
 Integrated hardware support for Ember development environment
 Non-intrusive debug port (SIF)
 AES 128-bit encryption
 Low power consumption
 Constant RF output power over 2.1V - 3.6V voltage range
 FCC (V8NWAT1000142) and IC (7737A-WAT1000142) --- PENDING
 128KB Flash Memory
 5KB SRAM
 16-bit XAP2b microprocessor
 16 general purpose inputs and outputs (GPIO)
 UART, SPI, and I2C interfaces
 Integrated ADC with 12-bit maximum resolution