User's Manual

Dynamic Series
Part A: Description, warnings and instructions
Warnings
A - 8
Do not touch the receiving unit’s metal parts as they may reach high, po-
tentially dangerous temperatures.
In case of malfunction, disable the system “machine+radio remote control”
until the problem has been completely solved.
3.3 After using the radio remote control
Switch off the transmitting unit when work is stopped or temporarily inter-
rupted. Do not leave the load hanging (even when changing the battery).
Never leave the transmitting unit unguarded when the S-KEY is inserted.
Always store the S-KEY in a safe place each time it is removed from the
transmitting unit. If this key is lost, the radio remote control cannot work,
since the transmitting unit needs the address stored in the key to work with
its receiving unit.