User's Manual

2.1.3 Protection from unintended activation

The transmitting unit housing is manufactured so that it protects the actuators from unintentional

activation, while meeting at the same time the operating needs, the comfort requirements

and law limits.

Assessment shall be made to establish possible additional protection measures for the

actuators (i.e. commands requiring two-hand operation, “dead-man” function) if particular

environments, equipment and working modes could cause accidental bumps to the actuators.

2.1.4 Command activation and loss of command

Please consider that it is possible to unintentionally activate a command and/or involuntarily

loose the selection of a command. Such anomalous events may be caused by electro-

mechanical or mechanical damages in the "machine+radio remote control" system.

Carefully evaluate the possible consequences of such malfunction.

If required by the risk assessment, draw up protection measures to prevent, reduce and

report potential hazard situations.

2.2 Sta󰓐training

All installation, usage and maintenance operations must be carried out by quali󰘰ed technicians

who are suitably trained with respect to:

- warnings resulting from risk assessment

- regulations and reference laws

- instructions and warnings provided in the documents related to the industrial radio remote

control and to the radio remote controlled machine

- instructions provided by those who install the radio remote control on the machine and

by the person in charge for workplace safety where the system machine+radio remote

control is used

2.3 Working conditions

To guarantee correct radio remote control operation, all current regulations regarding safety at

work and accident prevention should be respected. All applicable standards and regulations

valid in the user country regarding the use of both the machine and the radio remote control

must always be respected.

Autec cannot be held responsible if the radio remote control is used in unlawful

working conditions.

LIDYNE00-04

Risk assessment

AUTEC - Dynamic Series