User's Manual
4 Radio remote control life cycle
To ensure safe and long-lasting operation of industrial radio remote controls, carefully follow
the instructions provided for each stage of the product life cycle.
4.1 Transportation and storage
Radio remote controls must always be transported and stored inside their packing
until they are installed on the machine.
Environmental transportation and storage conditions are given in the following table.
Temperature Relative Humidity Air pressure
Transportation
Class 2K3
-40°C to +70°C
(-40°F to +158°F)
Class 2K3
95%
Class 2K3
70kPa to 106kPa
Storage
Class 1K5
-40°C to +80°C
(-40°F to +176°F)
Class 1K3
5% to 95%
Class 1K5
70kPa to 106kPa
4.2 Installation
The radio remote control can only be installed and tested by competent sta that
masters the technical knowledge required to carry out these procedures and is
qualied according to the regulation of the country where the radio remote control
is mounted.
Only if the radio remote control is installed correctly can it be used safely.
Always follow the instructions provided in the technical data sheet to carry
out correct installation.
Please contact the machine manufacturer or the person who decided upon
the installation of the radio remote control for instructions and warnings
regarding the installation.
AUTEC - Dynamic Series
Radio remote control life cycle 15
LIDYNE00-04