User's Manual
During normal operation:
- check structural integrity of the transmitting unit
- make sure that materials that could endanger the transmitting unit usage and safety (such
as concrete, sand, lime, dust) do not deposit on it.
After using the radio remote control:
- clean the transmitting unit: never use solvents or ammable/corrosive materials and do
not use high-pressure water cleaners or steam cleaners
- store the transmitting unit in clean and dry areas.
4.4.3 Three-month routine maintenance
Every three months:
- remove dust or deposit of material from the receiving unit: never use solvents or ammable/
corrosive materials to clean it, and do not use high-pressure water cleaners or steam
cleaners
- check structural integrity of the receiving unit
- make sure that the wiring of the receiving unit is intact and connected
- make sure that the receiving unit panel symbols can be easily recognised and replace
the panel if necessary
- check that the plates on the receiving unit are readable and intact.
4.4.4 Special maintenance
Special maintenance consists of repairs needed due to radio remote control failure, damage
or malfunction, carried out with the aim of restoring the original usage and working conditions.
Prior to contacting the support service technicians:
- read and understand all documents related to the radio remote control, and
make sure that all the instructions they contain have been accomplished
correctly
- follow the instructions to detect possible malfunctions and their origins.
Any fault should be repaired by authorised personnel only (contact the
support service of the machine's manufacturer), using original Autec spare
parts only.
The following radio remote control data must be reported in order to make interventions
faster and more reliable:
- radio remote control serial number (S/N)
- purchase date (given on the certicate of guarantee)
- description of the problem found
- address and telephone number of the place where the device is being used (with the
name of the person to contact)
- local supplier.
18
LIDYNE00-04
Radio remote control life cycle
AUTEC - Dynamic Series