User's Manual

6 Operation

6.1 BATTERY

The Dynamic series' transmitting units can only be powered through Autec

rechargeable batteries.

See the battery charger manual enclosed in the packaging with the battery

charger for any warnings and instructions regarding the batteries.

Batteries shall be inserted in their housing in the transmitting unit, with the technical data

plate facing down and their contacts towards the contacts on the transmitting unit.

To insert a battery, proceed as follows:

1. push the battery towards the contacts on the transmitting unit

2. push the battery downwards.

To remove a battery, proceed as follows:

3. push the battery towards the contacts on the transmitting unit

4. lift the battery.

6.2 S-KEY

In the transmitting unit, the radio remote control address is stored in the S-KEY. For this

reason, the radio remote control cannot work without this key.

LIDYNE00-04

Operation

AUTEC - Dynamic Series