User's Manual

6.5.4 ENGINE
This switch is used to switch on and o󰘯 the engine of the remote controlled machine.
Symbol Meaning
This symbol indicates that the engine is powered on.
This symbol indicates that the engine is switched o󰘯.
6.5.5 DISPLAY pushbutton (if the transmitting unit has a display)
This pushbutton is used to:
- activate the display lighting, if it is o󰘯
- cyclically scroll the information on the display in two di󰘯erent modes
- manual: the lines scroll up each time the pushbutton is pressed
- automatic: when the DISPLAY pushbutton is pressed for 3 seconds, the lines scroll
automatically. If the DISPLAY pushbutton is pressed another time, it switches back
to manual mode.
It is not possible to scroll the lines if icons only are displayed.
The display lighting stays on for a time set by the machine manufacturer.
6.6 Low Power function
The LOW POWER function allows transmission at a lower power than the nominal power
(see paragraph 1.2) and reduces the radio remote control working range.
This function aims at:
- making it easier to work with several systems in the same working environment (i.e.:
many working machines in the same working area)
- extending the battery run-time.
This function is established by the machine manufacturer (see technical data sheet).
28
LIDYNE00-04
Operation
AUTEC - Dynamic Series