User's Manual

1 Radio remote control description
1.1 How the radio remote control works
Industrial radio remote controls are used to control machines from a distance, without physical
connection between the user and the machine (i.e. wires or connecting cables). They consist
of a portable transmitting unit, from which the user remotely controls the machine, and a
receiving unit installed on board the machine itself.
1.2 Technical Data
Command response time .................................................................................... 80-130ms
Active stop time ..................................................................................................... <130ms
(Max.) active stop time ............................................................................................ 200ms
Passive stop time
a
............................................................................................. 0.5 / 1 / 2s
Hamming distance ....................................................................................................... ≥15
Probability of undetected error ................................................................................. <10
-15
Working range (typical) ................................................................................. 100m (330ft)
Working range with Low Power function .......................................................... 30m (100ft)
Performance Level of safety functions according to EN ISO 13849-1 / EN IEC 62061:
STOP protection ...................................................................... PL e / SIL 3 (4-wire wiring)
.................................................................................................. PL d / SIL 2 (2-wire wiring)
Protection against unintended movements from the standstill position (UMFS) PL d / SIL 2
a. Passive stop cut-in time is set by the machine manufacturer (see technical data sheet).
AUTEC - Dynamic Series
Radio remote control description 7
LIDYNE00-04