Instruction Manual
LIUDPP000_eng-00 AUTEC
22
Never leave the Transmitting Unit unguarded in order to avoid uncertainty
about the availability or unavailability of the op function.
A Transmitting Unit belonging to a "Take & Release" Radio Remote Control
is enabled to send the op command to the Receiving Unit only if it is working
with the latter, that is to say, if the art up procedure has been performed (see
paragraph "Radio Remote Control Start Up" in "Part C" of the Inruction
Manual). Therefore, the Transmitting Units that are not being used cannot
send the op command to the Receiving Unit.
Store the unused Transmitting Units in a safe place, to avoid hesitation as far
as the availability of the op function is concerned.
The “life time”, as defined in international andards and requirements, of the
op function is 20 years. In any case, the Radio Remote Control mu be
replaced within this period. The "life time" mu not be considered as a warranty
period.
After the activation of the STOP pushbutton on the Transmitting Unit, the
Machine is not controlled by the Radio Remote Control any more. Any possible
risks that may arise from the activation of the op function mu be taken into
account by the Inaller of the Radio Remote Control, and by the Manufacturer
and the Owner of the Machine where the Radio Remote Control is inalled.
The Radio Remote Control User mu be properly trained about this.