User's Manual

14
LIDYNE00-05
Warnings for use
AUTEC - Dynamic series
Visually and directly follow all movements of the machine and its load and
remain inside the radio remote control working range.
Pay particular attention to warnings and visual and acoustic signals, and
take all measurements and steps to avoid that movements of the remote
controlled machine may lead to hazardous situations for people and/or
property.
In case of malfunction, disable the system “machine+radio remote control”
until the problem has been completely solved.
Use the transmitting unit in a simple and comfortable way, avoiding accidental
falls. The waist belt and the shoulder harness provided with the radio remote
control are used for that purpose.
Do not touch the receiving unit’s metal parts as they may reach high,
potentially dangerous temperatures.
3.3 After using the radio remote control
Switch off the transmitting unit when work is stopped or temporarily
interrupted. Do not leave the load hanging (even when changing the battery).
Never leave the transmitting unit unguarded when the S-KEY is inserted.
Always store the S-KEY in a safe place each time it is removed from the
transmitting unit. If this key is lost, the radio remote control cannot work,
since the transmitting unit needs the address stored in the key to work with
its receiving unit.