User's Manual

AUTEC - Dynamic series
Operation 25
LIDYNE00-05
6.2 S-KEY
In the transmitting unit, the radio remote control address is stored in the S-KEY. For this
reason, the radio remote control cannot work without this key.
The S-KEY can only be used in the transmitting unit of the radio remote
control where it belongs.
As the radio remote control address is stored in the S-KEY, use it with utmost
care to reduce risks that may result from incorrect handling.
6.2.1 S-KEY insertion
Perform the following operations to insert the S-KEY:
1. push the S-KEY inside the corresponding housing
2. rotate the S-KEY clockwise.
6.2.2 S-KEY removal
Perform the following operations to remove the S-KEY:
3. rotate the S-KEY anticlockwise
4. pull the S-KEY to remove it from the corresponding housing.
6.2.3 BACK-UP UNIT
If the main transmitting unit cannot be used because it has been lost or damaged, it can be
replaced with a transmitting unit called "BACK-UP UNIT".
It is identical to the unit that cannot be used anymore; the only di󰘯erence is the presence of
the plate “BACK-UP UNIT” on the battery housing.
Insert the S-KEY of the transmitting unit that cannot be used anymore in
the “BACK-UP UNIT”.