User's Manual

AUTEC - Dynamic Plus series
Radio Remote Control storage before installation or after removal 23
LIUDTH000_eng-00
5 Radio Remote Control storage before installation or after removal
Radio Remote Controls must always be transported and stored inside their packing until they
are installed on the Machine.
The Radio Remote Control system and all components are to be shipped and maintained
according to the following environmental parameters and conditions:
Temperature Relative Humidity Air pressure
Transportation
-40°C to +70°C
(from -40°F to +158°F)
b
95%
b
from 70kPa to 106kPa
b
Storage
from -40°C to +85°C
(from -40°F to +185°F)
c
from 5% to 95%
d
from 70kPa to 106kPa
c
b. Class 2K4 of standard EN 50178.
c. Class 1K5 of standard EN 50178.
d. Class 1K3 of standard EN 50178.