User's Manual

AUTEC - Dynamic Plus series
Installation 25
LIUDTH000_eng-00
In addition to the above, Dynamic Plus series' Radio Remote Controls
cannot be installed:
- On Machines that are intended for the use in environments requiring
explosion-proof features or in any usage situation that may pose the
risk of explosion.
- on Machines where the Receiving Unit power supply does not come from
a battery or from a power supply unit with safety isolating transformer;
- On Machines that control loads that are not isolated from alternating
current (AC) power supply (if that is the case);
- On Machines that create or can create dangerous situations if they stop
due to the loss of radio link.
- On Machines that do not allow a risk-free installation of a Radio Remote
Control, due to their functions or features and/or to the risks related to
their use.
- On any kind of lifting accessory (by way of example: magnets, grippers,
suction cups) whenever the loss of radio link or the deactivation of
commands may cause the release of the load, resulting in the risk of
damage to people and/or property. The Machine Manufacturer may allow
the installation and use of the Radio Remote Control for such applications
under their own responsibility.
- If the applicable safety-related laws in the country where the Machine
is used, regulations and standards (even local ones), even concerning
safety in the workplace, do not allow the use of Radio Remote Controls
to control the Machines.
INSTALLATION OF AN AUTEC RADIO REMOTE CONTROL ON MACHINES
AND IN THE ABOVE-MENTIONED SITUATIONS MAY CAUSE SERIOUS INJURY
OR DEATH OR PROPERTY DAMAGE.