User's Manual
AUTEC - Dynamic Series
Technical data 3
LIFJME00-06
2 Technical data
Power supply (battery MBM06MH) ......................................................................... 7.2V
Power supply (battery LPM02) ............................................................................... 7.4V
Power supply (battery LPM04) ............................................................................... 7.4V
Antenna .................................................................................................................. internal
Housing material .......................................................................................... PA 6 (20%fg)
Protection degree ....................................................................................... IP65 (NEMA 4)
Dimensions .................................................................. 310x210x190mm (12.2x8.3x7.5In)
Weight ........................................................................................................... 2.5kg (5.5Lb)
Run time at 20°C (68°F):
- with battery MBM06MH ............................................................................................... 11h
- with battery MBM06MH and monochromatic display 2.7" .............................................. 9h
- with battery LPM02 .................................................................................................. 18.5h
- with battery LPM02 and monochromatic display 2.7" ................................................... 15h
- with battery LPM04 ..................................................................................................... 35h
- with battery LPM04 and monochromatic display 2.7" ................................................... 28h
- with battery LPM04 and color display 4.3" ..................................................................... 8h
3 Technical data sheet
The technical data sheet contains the transmitting unit conguration and shows the matching
between commands sent and machine functions/movements. It also contains the wiring
diagram showing the connection between the receiving unit and the machine.
Each technical data sheet must be lled in, checked and signed by the installer, who is
responsible for a correct wiring.
A technical data sheet must always be kept toghether with this manual (always keep a copy
of the technical data sheet when it is used for administrative purposes).
The wiring of the receiving unit outputs must always reect the wiring
indicated in the technical data sheet.