User's Manual

6
LIFJME00-06
Light signals
AUTEC - Dynamic Series
The red LED [A]
a
… Meaning
…is o󰓐. The transmitting unit works correctly.
… blinks The battery is nearly 󰘱at.
... illuminates for 2 seconds
b
The transmitting unit does not work correctly.
... blinks once
b
At power on, the transmitting unit detects that the STOP
pushbutton is activated or damaged.
... blinks twice
b
At power on, the transmitting unit detects that one of the
commands D2-D20 or SAFETY is activated or damaged
(see technical data sheet).
... blinks three times
b
At power on, the transmitting unit detects that the battery
is 󰘱at.
... blinks four times
b
At power on, the transmitting unit detects that one of
the commands A1-A8, L1-L8 and H1-H8 is activated or
damaged (see technical data sheet).
a. An acoustic signal is also heard when the red LED [A] is illuminated.
b. After this signal, the transmitting unit switches o󰘯.