User's Manual
AUTEC - Dynamic Series
General operating instructions 25
LIDYNE00-07
5.6 Switchingothetransmittingunit
Thetransmittingunitshallbeswitchedoeachtimeworkisstopped.
Voluntary transmitting unit's switch o occurs:
- when the power keyswitch (if present) is turned anti-clockwise
- when battery is removed (see paragraph 6.1.2)
- when the STOP pushbutton is pressed.
5.7 Switchingothereceivingunit
The receiving unit shall be switched o each time the radio remote control is not used to
control the machine. Remove power from the unit to switch it o.
When the radio remote control is installed on machines on board vehicles,
switchothereceivingunitwhilethevehicleistravelling.