User's Manual
AUTEC - Dynamic Series
Operation 31
LIDYNE00-07
6.6.4 Engineon/oswitch
This switch is used to switch on and o the engine of the
remote controlled machine.
Symbol Meaning
This symbol indicates that the engine is powered on.
This symbol indicates that the engine is switched o.
6.7 Low Power function
The LOW POWER function allows transmission at a lower power than the nominal power
(see paragraph 1.2) and reduces the radio remote control working range.
This function aims at:
- making it easier to work with several systems in the same working environment (i.e.:
many working machines in the same working area)
- extending the battery run-time.
This function is established by the machine manufacturer (see technical data sheet).