User's Manual

AUTEC - Dynamic Series
User manual
FJS transmitting unit
Light signals
16
5.3 Light signals
FJS transmitting units may have two or three LEDs near the STOP pushbutton.
5.3.1 Light signals with two LEDs
The left LED is green, the right LED is red, and
they provide information regarding the radio re-
mote control.
The green LED ...
Meaning
... is off The transmitting unit is switched off.
... blinks fast
The transmitting unit is switched on and there is no
radio link.
... blinks slowly
The radio remote control is started and the radio link is
present.
The red LED
a
...
a. An acoustic signal is also heard when the red LED is illuminated.
Meaning
... is off The transmitting unit works correctly.
...blinks The battery is nearly flat.
... is on for 2 seconds
b
b. After this signal, the transmitting unit switches off.
The transmitting unit does not work correctly.
... blinks once
b
At power on, the transmitting unit detects that the
STOP pushbutton is activated or damaged.
... blinks twice
b
At power on, the transmitting unit detects that one of
the commands D2-D20 or SAFETY is activated or
damaged (see technical data sheet).
... blinks three times
b
At power on, the transmitting unit detects that the bat-
tery is flat.
... blinks four times
b
At power on, the transmitting unit detects that one of
the commands A1-A8, L1-L8 and H1-H8 is activated or
damaged (see technical data sheet).