User's Manual

FJS transmitting unit
Light signals
AUTEC - Dynamic Series
LIUDYN2AC0-00_eng.fm User manual
17
5.3.2 Light signals with three LEDs
Side LEDs are red and provide information
coming from the machine (Data Feedback func-
tion).
The central LED is bicolour, green and red. The
green LED is inhibited when the red one is on:
the green LED signals only appear when the red
ones pause. The central LED provides informa-
tion about the radio remote control.
Central LED is green
and it ...
Meaning
... is off The transmitting unit is switched off.
... blinks fast
The transmitting unit is switched on and there is no
radio link.
... blinks slowly
The radio remote control is started and the radio link is
present.
Central LED is red
and it ...
a
a. An acoustic signal is also heard when the red LED is illuminated.
Meaning
... is off The transmitting unit works correctly.
...blinks The battery is nearly flat.
... is on for 2 seconds
b
b. After this signal, the transmitting unit switches off.
The transmitting unit does not work correctly.
... blinks once
b
At power on, the transmitting unit detects that the
STOP pushbutton is activated or damaged.
... blinks twice
b
At power on, the transmitting unit detects that one of
the commands D2-D20 or SAFETY is activated or
damaged (see technical data sheet).
... blinks three times
b
At power on, the transmitting unit detects that the bat-
tery is flat.
... blinks four times
b
At power on, the transmitting unit detects that one of
the commands A1-A8, L1-L8 and H1-H8 is activated or
damaged (see technical data sheet).