User's Manual

FJL transmitting unit
Light signals
AUTEC - Dynamic Series
LIUDYN2AC0-00_eng.fm User manual
19
6.3 Light signals
FJL transmitting units have four LEDs on the left of the STOP
pushbutton:
- a green LED, identified with , providing information
about the radio remote control.
- a red LED, identified with , providing information about
the radio remote control.
- two red LEDs (the two lower ones) that may provide information
coming from the machine (Data Feedback function).
The green LED ...
Meaning
... is off The transmitting unit is switched off.
... blinks fast
The transmitting unit is switched on and there is no
radio link.
... blinks slowly
The radio remote control is started and the radio link is
present.
The red LED
a
...
a. An acoustic signal is also heard when the red LED is illuminated.
Meaning
... is off The transmitting unit works correctly.
...blinks The battery is nearly flat.
... is on for 2 seconds
b
b. After this signal, the transmitting unit switches off.
The transmitting unit does not work correctly.
... blinks once
b
At power on, the transmitting unit detects that the
STOP pushbutton is activated or damaged.
... blinks twice
b
At power on, the transmitting unit detects that one of
the commands D2-D20 or SAFETY is activated or
damaged (see technical data sheet).
... blinks three times
b
At power on, the transmitting unit detects that the bat-
tery is flat.
... blinks four times
b
At power on, the transmitting unit detects that one of
the commands A1-A8, L1-L8 and H1-H8 is activated or
damaged (see technical data sheet).