User's Manual
Table Of Contents
- Index
- 1 User manual
- 2 Documentation
- 3 Dynamic series description
- 4 Risk analysis
- 5 FJS transmitting unit
- 6 FJL transmitting unit
- 7 FJM transmitting unit
- 8 ARM receiving unit
- 9 Warnings
- 10 Radio remote control lifecycle
- 11 General operating instructions
- 12 Working
- 13 Values of proportional outputs
- 14 Data memory backup
- 15 Troubleshooting
AUTEC - Dynamic Series
User manual
FJM transmitting unit
Light signals
22
If it has 4 LEDs, the side LEDs are red and provide information coming from the
machine (Data Feedback function).
The red LED
a
...
a. An acoustic signal is also heard when the red LED is illuminated.
Meaning
... is off The transmitting unit works correctly.
...blinks The battery is nearly flat.
... is on for 2 seconds
b
b. After this signal, the transmitting unit switches off.
The transmitting unit does not work correctly.
... blinks once
b
At power on, the transmitting unit detects that the
STOP pushbutton is activated or damaged.
... blinks twice
b
At power on, the transmitting unit detects that one of
the commands D2-D20 or SAFETY is activated or
damaged (see technical data sheet).
... blinks three times
b
At power on, the transmitting unit detects that the bat-
tery is flat.
... blinks four times
b
At power on, the transmitting unit detects that one of
the commands A1-A8, L1-L8 and H1-H8 is activated or
damaged (see technical data sheet).