User's Manual
Table Of Contents
- Index
- 1 User manual
- 2 Documentation
- 3 Dynamic series description
- 4 Risk analysis
- 5 FJS transmitting unit
- 6 FJL transmitting unit
- 7 FJM transmitting unit
- 8 ARM receiving unit
- 9 Warnings
- 10 Radio remote control lifecycle
- 11 General operating instructions
- 12 Working
- 13 Values of proportional outputs
- 14 Data memory backup
- 15 Troubleshooting
AUTEC - Dynamic Series
User manual
ARM receiving unit
Mother board
24
8.2 Mother board
8.3 Technical data
Power supply ......................................................................................................... 8-30 V
Antenna ................................................................................................................ dedicated
Rated current of outputs STOP_1 and STOP_2 ........................................... 7.5 A (30 V )
Rated current of output SAF_1 ..................................................................... 7.5 A (30 V )
Rated current of output SAF_2 ........................................................................ 3 A (30 V )
Rated current of digital outputs ........................................................................ 4 A (30 V )
Rated current of analogue outputs (PWM) ...................................................... 2 A (30 V )
Rated current of analogue outputs (voltage) .............................................. 10 mA (28 V )
Protection SAF_2 (fuse F1) ............................................................. 3 A (32 V , autofuse)
Protection of power supply (fuse F2) ............................................. 7.5 A (32 V , autofuse)
Protection STOP_1 (fuse F3) ....................................................... 7.5 A (32 V , autofuse)
Protection STOP_2 (fuse F4) ....................................................... 7.5 A (32 V , autofuse)
Protection SAF_1 (fuse F5) .......................................................... 7.5 A (32 V , autofuse)
Housing material ............................................................................................ PA6 (30% fg)
Protection degree ..........................................................................................................IP65
Dimensions ............................................................. 200 x 230 x 95 mm [7.9’’ x 9.1’’ x 3.7’’]
Weight...............................................................................................................3 kg [6.6 lbs]
A fuse F1
B fuse F2
C fuse F3
D fuse F4
E fuse F5
F DTK connector (for data memory)
G IDK (for address key)
H
BKK connector (for backup data
memory)
A B
C
D
E
F
G H