User's Manual

AUTEC - Dynamic Series
User manual
User manual
Symbol conventions
4
No part of this manual may be reproduced, in any form or by any means, without
written permission of Autec (including recording and photocopying).
If this manual is lost or damaged, ask Autec for a copy. Please specify the serial
number of the related radio remote control.
Information contained in this manual adds to and completes the information pro-
vided by the manufacturer of the remote controlled and/or by those who install the
radio remote control on the machine.
All installation, usage and maintenance operations must be carried out by quali-
fied technicians who are suitably trained with respect to the relevant norms and
laws.
Therefore, this manual must be read and understood in all its parts by the user
and by:
- the radio remote control owner and/or installer
- the person responsible for and in charge of maintenance and/or safety in the
workplace where the radio remote control is used.
As for instructions and warnings regarding the machine where the radio remote
control is installed, follow the instructions given in the machine's manual.
1.2 Symbol conventions
Three symbols are employed in this manual, which are used to highlight specific
safety-related issues. They are classified according to the hazardous situation
that may arise and on the possible consequences:
This symbol is also used, and it identifies texts to be read carefully.
Symbol
If the highlighted instructions are not respected, this leads to
hazardous situations with the following characteristics:
dangerous
situation
gravity of consequences
for people
gravity of consequences
for property
…highly
probable.
… critical (death or
physical damage).
… critical.
… probable.
… critical (death or
physical damage).
… critical.
… probable.
… moderate (non-severe
physical damage).
… moderate.