Instruction Manual
LIUDP1002_eng-00 AUTEC
18
4.2 Frequency band 915-928MHz
4.2.1 Frequencies
The radio link between the Units of Autec Dynamic+P series Radio Remote Controls is eablished
at one of the frequencies permitted by the USA, Canadian and Auralian andards in force
when the syem is put on the market.
Frequencies used 256
RF power meets FCC and IC requirements
Channel spacing 50kHz
The Units communicate with one another in dynamic mode, that is:
- They use a working frequency in the 915-928MHz
- They check that the frequency is free before using it
- They continually change the working frequency to maintain the radio link even when
interference occurs.
4.2.2 Countries of usage
Dynamic+P series' radio remote controls working in the frequency band 915-928MHz can be
used in the USA, Canadian and Auralian markets.
Check on the technical data plate of the Units in which markets the Radio Remote Control can
be used.