Instruction Manual

LIUPJQ001_eng-00AUTEC

1.4 To whom the in󰄋ructions are addressed

Addressees of instructions are listed in the paragraph with the same title in the general part:

please refer to that part.

1.5 In󰄋ruction 󰄋orage

Regulation for the storage of instructions are described in the paragraph with the same title

in the general part: please refer to that part.

1.6 Intellectual property

Restrictions connected to intellectual property are described in the paragraph with the same

title in the general part: please refer to that part.

2 Brief product presentation

2.1 Series, Radio Remote Control and Unit

The object of this part of the Manual is the PJQ (Model J6P) Transmitting Unit of an Autec

Dynamic+P series' Radio Remote Control.

Autec Dynamic+P series' Radio Remote Controls are designed to be used on Machines and

provide a command interface to their command and control sy󰘵em, to be used from an appropriate

di󰘵ance and position.

2.2 Conformity with 󰄋andards

The conformity of Radio Remote Controls with standards and with working requirements and

conditions in the single Countries is provided in the related speci󰘰c part “Conformity and

frequencies” (Part B) of the Manual.

2.3 Contacts and useful addresses

The Radio Remote Controls are produced by Autec Srl – Via Pomaroli, 65 - 36030 Caldogno

(VI) - Italy.

You can find contacts for Autec, its di󰘵ributors, dealers and authorized service centres on the

website www.autecsafety.com.

2.4 Warranty

General warranty conditions are indicated both in the relevant sheet provided together with this

documentation, and in the specific page on the website www.autecsafety.com.

2.5 Technical assi󰄋ance and spare parts

If you need technical services and/or spare parts, please refer to contacts provided in the website