Instruction Manual

LIUPJQ001_eng-00 AUTEC
42
Green LED
Red LED
2.8” display
Activated
command
Number of long
blinks
Number of
short blinks
On 4 5
Direct L active
10 05
L5
On 4 6
Direct L active
10 06
L6
On 4 7
Direct L active
10 07
L7
On 4 8
Direct L active
10 08
L8
Whenever the red LED illuminates, the acou󰘵ic signal device activates.
Examples
If the red LED emits one long blink and twelve short blinks, this means that the Transmitting
Unit detected that command D12 is activated.
If the red LED emits two long blinks and five short blinks, this means that the Transmitting Unit
detected that command A5 is activated.
If the red LED emits three long blinks and two short blinks, this means that the Transmitting Unit
detected that command H2 is activated.
If the red LED emits four long blinks and one short blink, this means that the Transmitting Unit
detected that command L1 is activated.
12 Decommissioning and disposal
Instructions for correct decommissioning and disposal of Radio Remote Controls are described
in chapter "Decommissioning and disposal" in "Part A" of the Instruction Manual. Therefore,
please refer to that part of the Manual.