Instruction Manual

LIUDPP000_eng-00 AUTEC
10
1.2 Caption and terminology
Contact Autec if any of the in󰘵ructions, symbols, warnings or images are not clear
and under󰘵andable, or if you have doubts or que󰘵ions.
The terms li󰘵ed here below have the 󰘵ated meaning throughout the entire Manual, including
all of its parts:
- Unit: the single (Transmitting or Receiving) Units that comprise the Autec Radio Remote
Control.
- Radio Remote Control: Cableless Control Sy󰘵em (CCS) made up of one or two Transmitting
Units and one Receiving Unit that communicate with each other through a radio link.
- Transmitting Unit: portable component (remote 󰘵ation) through which the User interfaces
with the Radio Remote Control.
- Receiving Unit: component 󰘰xed permanently on the Machine (base 󰘵ation); it con󰘵itutes an
interface between the Radio Remote Control and the other Machine's parts.
- Machine: the Machine, as de󰘰ned in the Directive 2006/42/EC and in any other local
regulations, and any other device, Machinery, equipment, Machinery sy󰘵em, application etc.,
where the Autec Radio Remote Control is in󰘵alled, or that is controlled by it.
- Manufacturer: the Person who plans and/or manufactures a Machine, an appliance, a device
or a Machinery sy󰘵em and decides to in󰘵all a Radio Remote Control on it to control the
Machine.
- In󰄋aller: the Person, quali󰘰ed technician, who plans and/or performs the in󰘵allation of an
Autec Radio Remote Control on a Machine to act on its commands.
- User: the Person who actually uses an Autec Radio Remote Control to act on the commands
of a Machine.
- Maintenance Technician: the Person, quali󰘰ed technician, who carries out routine or special
maintenance on an Autec Radio Remote Control, to keep it whole and e󰘯ective.
- Manual or In󰄋ruction Manual: document consi󰘵ing of: Part A – General, Part B – Conformity
and Frequencies, Part C – Transmitting Unit, Part D – Receiving Unit and Part E – Battery and
Battery Charger, plus the Technical Data Sheet.
- In󰄋allation Manual: the speci󰘰c manual containing speci󰘰c in󰘵ructions for the in󰘵allation of
the Radio Remote Control on the Machine: the In󰘵allation Manual is speci󰘰cally addressed to
the In󰘵aller.
- Person: individual, natural or legal person and/or any entity, however it is considered
- Owner: the owner of the Radio Remote Control.