Instruction Manual

LIUDPP000_eng-00AUTEC

Functions indicated for the Manufacturer, the In󰘵aller, the User and the Maintenance Technician

may be performed by a single Person, if he/she has the needed competence and undertakes

the resulting responsibilities. Each Person mu󰘵 be aware of the in󰘵ructions contained in the

Manual, depending on the activity they carry out.

For example, if a Manufacturer is also the In󰘵aller, and/or Maintenance Technician, he mu󰘵

also know and follow the in󰘵ructions specifically addressed to those Persons. The same applies,

for example, if a User is also the Manufacturer and/or the In󰘵aller.

1.3 Symbols

This symbol identifies the parts of text in the Manual that mu󰘵 be read with special

attention.

This symbol identifies the parts of text in the Manual containing warnings,

information and/or in󰄋ructions that are particularly relevant with regards to

safety; failure in under󰄋anding them may cause hazards for People and/or

property.

1.4 To whom the in󰄋ructions are addressed

The Instruction Manual for the use and the maintenance of the Radio Remote Control is

addressed to Manufacturers, design engineers, Installers, assemblers, mechanics, electricians,

Users, operators, drivers, workers, people responsible for productive activities, Maintenance

Technicians and to all the people who, in any capacity and for any reason, work with an Autec

Radio Remote Control or with the Machine where it is installed.

The Manual mu󰘵 be read carefully, under󰘵ood and applied in all its parts by:

- The Owner and/or Person responsible for the Machine and/or for the Autec Radio Remote

Control and/or for their operation

- The Machine Manufacturer, who decides to equip it with a Radio Remote Control

- The Radio Remote Control In󰘵aller or the Person who assembles it on a Machine, device,

Machinery sy󰘵em, etc., and/or who has the responsibility for that operation

- The Person responsible for safety in the workplace where the Radio Remote Control is used

- Users, that is to say, those who actually, and in any capacity, are quali󰘰ed/authorised/

appointed for the use of a Radio Remote Control, or who work with it

- Maintenance Technicians

- Those who, in any capacity, work with the Radio Remote Control and/or with the Machine,

sy󰘵em, device and/or Machinery sy󰘵em where an Autec Radio Remote Control is in󰘵alled,

or that are controlled by an Autec Radio Remote Control.