Instruction Manual
LIUDPP000_eng-00AUTEC
21
The op function may activate:
- Manually (active op): the User activates the op function pressing the red STOP pushbutton
on the Transmitting Unit.
- Automatically (passive op): the Receiving Unit autonomously activates the op function if
the radio link is incorrect or interrupted.
THE USER MUST AT ALL TIMES PAY FULL ATTENTION TO THE SAFE AND
PROPER OPERATION OF THE MACHINE IN ACCORDANCE WITH THE
INSTRUCTIONS AND WARNINGS PROVIDED IN THIS MANUAL AND WITH
THE MANUAL, INSTRUCTIONS AND WARNINGS FOR THE MACHINE AND
WITH ALL APPLICABLE LAWS, REGULATIONS AND STANDARDS, EVEN
LOCAL.
ACTIVATING THE STOP PUSHBUTTON OR RETURNING THE ACTUATORS
TO THE REST POSITION MAY NOT RESULT IN AN IMMEDIATE STOPPING OF
THE MACHINE.
THE STOP PUSHBUTTON MAY NOT ACTIVATE A BRAKE. FURTHERMORE,
DIFFERENT MACHINES HAVE DIFFERENT RESPONSE TIMES AND STOPPING
DISTANCES. WHILE THE STOP FEATURE IS HELPFUL, THE USER MUST BE
FULLY AWARE OF THE MOVEMENTS AND OPERATING ZONES OF THE
MACHINE AND MUST ALLOW FOR SUFFICIENT SAFE FUNCTIONING OF THE
MACHINE, INCLUDING SUCH RESPONSE TIMES AND STOPPING DISTANCES.
FAILURE TO DO SO CONTINUOUSLY AND CORRECTLY MAY RESULT IN
SEVERE INJURY OR DEATH, OR PROPERTY DAMAGE.
The op function by means of Radio Remote Control is available only if the Radio
Remote Control is arted up (see "Starting up the Radio Remote Control" in the
"Part C" of the Manual).