Instruction Manual

LIUDPP000_eng-00AUTEC
29
In addition to the above, Dynamic+P series' Radio Remote Controls cannot
be in󰄋alled:
- On Machines that are intended for the use in environments requiring
explosion-proof features or in any usage situation that may pose the risk of
explosion
- On machines where the receiving unit power supply does not come from a
battery or from a power supply unit with safety isolating transformer
- On Machines that control loads that are not isolated from alternating current
(AC) power supply (if applicable)
- On Machines that create or can create dangerous situations if they 󰄋op due
to the loss of radio link
- On Machines that do not allow a risk-free in󰄋allation of a Radio Remote
Control, due to their functions or features and/or to the risks related to their
use
- On any kind of lifting accessory (by way of example: magnets, grippers,
suction cups) whenever the loss of radio link or the deactivation of
commands may cause the release of the load, resulting in the risk of damage
to people and/or property. The Machine Manufacturer may allow the
in󰄋allation and use of the Radio Remote Control for such applications
under their own responsibility
- If the applicable safety-related laws in the country where the Machine is
used, regulations and 󰄋andards (even local ones), even concerning safety
in the workplace, do not allow the use of Radio Remote Controls to control
the Machines.
INSTALLATION OF AN AUTEC RADIO REMOTE CONTROL ON MACHINES
AND IN THE ABOVE-MENTIONED SITUATIONS MAY CAUSE SERIOUS INJURY
OR DEATH OR PROPERTY DAMAGE.