Instruction Manual

LIUDPP000_eng-00 AUTEC

After in󰄋alling and wiring the Receiving Unit, te󰄋 the Machine controlled by

the Radio Remote Control and verify that the operations carried out correspond

exactly to the commands sent, including in particular but not limited to the

functionality of the STOP command.

Make sure that the SAFETY outputs (of UMFS function) only activate after the

Radio Remote Control has 󰄋arted, and when at lea󰄋 one movement command

is sent to the Machine. Also make sure that the SAFETY outputs disable when

all the movement commands are released.

In case of malfunction, disable the sy󰄋em “Machine+Radio Remote Control”

until the problem has been completely solved and the in󰄋allation and

functionality is confirmed to be correct..